(This webinar will be conducted in Mandarin. If you would like to view related English battery events, click here)
Lithium-ion batteries have revolutionized renewable energy storage technology, not only for portable phones but also for storage in electric grid and the automotive sector. Consumer expectations on lithium-ion batteries have become more demanding. Batteries need to charge faster, weigh less, be smaller, store for longer yet perform better and safer. Battery manufacturers and researchers alike need to rely on multiple techniques to design and perform quality checks on such high performing batteries. In this free online workshop, Malvern Panalytical partners with NDC and our distributor in Taiwan, DKSH, to share with you on the cutting-edge technologies for battery cathode, anode, coatings and other raw materials.
Structural performance analysis using X-ray diffraction
利用 XRD 進行結晶結構特性分析
The important critical parameters which influence the battery performance are primary particle size, crystalline phases, composition, and coating thickness of the electrode materials. These parameters can be extracted from the data collected using X-ray diffractometry.
Crystalline phase composition defines the overall electrode material quality and its suitability for the battery cell manufacturing. X-ray diffraction is the technique of choice when it comes to the analysis of crystalline phases. Malvern Panalytical's X-ray diffractometer range which includes the Aeris compact XRD is an easy to use instrument with superb data quality. Battery researchers and QC managers use the Aeris for accurate analysis of:
• Crystalline phase composition and presence of any residual reactants (optimization of calcination process)
• Crystallite size (related to the primary particle size)
• Degree of graphitization in synthetic anode graphite
The X-ray diffraction (XRD) technique is a non-destructive technique and heavily used in laboratory work for various applications such as identification and quantification of crystalline phases and average crystallite size analysis of synthesized powder materials. The extracted crystallographic information such as interlayer spacing can be used to calculate the degree of graphitization or the orientation index in graphite battery anode materials. Also important to know phase of cathode
結晶相組成是電極材料極為重要的一個因素，大大影響了電池的品質。而XRD) 技術正是相分析的唯一選擇。簡易操作的桌上型Aeris XRD有著出眾的品質，可以針對以下需求進行分析
Elemental analysis for energy density and charge cycles
The ratio between nickel, manganese, and cobalt in a battery’s cathode determines its energy density (and the lifetime of one charge cycle) as well as the number of charge cycles it can withstand. That’s where X-ray fluorescence (XRF) comes in. Although traditionally overlooked, it provides significant benefits to battery manufacturing. Specifically, our new benchtop XRF, Epsilon 4, can determine elemental composition in just 10 minutes during production.
電池陰極中鎳、錳和鈷的比例決定了它的能量密度（和一個充電週期的壽命）以及它可以承受的充電週期數。這就是 X 射線熒光 (XRF) 的在電池分析的重要性。 儘管傳統上被忽視，但它為電池製造提供了顯著的好處。具體來說，它可以在生產過程中在短短 10 分鐘內確定元素組成。
Particle size and shape analysis for improved battery packing density, uniformity of coatings and more
Electrode material and battery slurry particle size and shape variations must be regularly measured and optimized throughout the production process to maintain consistent battery performance. Based on laser diffraction, our offers the easiest, most accurate way of measuring cathode and anode material particle sizes. And, for industrial process environments, it can be replaced by our to provide real-time data for process control. Our optical imaging tool can analyze the size and shape of statistically relevant ensembles of particles in just a few minutes.
Precise end-to-end gauging methods from basis weight to final thickness of coatings
The thickness of your battery coatings can highly impact your battery’s performance, safety and lifespan. NDC's measurement solutions for LiB component production stand apart from conventional gauging methods by offering a complete end-to-end gauging system from basis weight measurement of anode and cathode coatings to final product thickness measurement in the roll press line. All possible with NDC’s comprehensive solutions like the Photon Sensor, Micro Caliper Thickness Sensor and Laser Speed Pro. See how you can benefit from greater process visibility and control, so you exceed the market demand for outstanding quality and performance, while realizing bottom-line advantages.
1. Photon Sensor
2. Micro Caliper Thickness Sensor
3. Laser Speed Pro
Dr Plex Lee (李秉中), Applications Engineer at Malvern Panalytical, Taiwan
Dr. Plex Lee joins the Taiwan team as an applications engineer. Dr Lee has a PhD in Engineering and System Science. His expertise is on nano science, thin-film analysis, thermoelectric material, PLD and low temperature physics research. He has multiple years of experience in providing experimental consultancy and data analysis guidance using X-ray diffraction and X-ray fluorescence to numerous research realms. These include quantum-material, superconductor, magnetic thin film, nano-bio materials and more. Dr Lee has conducted research using powder, thin film, single crystal X-ray diffraction and is well versed in Rietveld refinement, elemental composition analysis, grain size and residual stress research. Prior to joining Malvern Panalytical, he worked in the Institute of Physics at Academia Sinica for close to 13 years. He took on various roles as an X-ray analysis laboratory manager and postdoctoral fellow.
李秉中博士近日以應用專家的身分加入Malvern Panalytical X光分析團隊,李博士擁有工程與系統科學博士學位,主要研究領域為奈米科學,薄膜分析,熱電材料以及低溫物理相關主題.他在X光材料分析領域也擁有多年經驗,包含X光繞射分析以及X光螢光分析.在中研院物理所擔任博士後研究以及X光實驗室主任期間,對於各研究團隊所需X光材料分析多有著墨,材料的型態涵蓋粉末,薄膜,單晶繞射以及Rietveld結構精算分析,而領域則含括量子材料,超導材料,磁性薄膜,奈米生物材料等.
Albert Yang (楊詠暉), Technical Manager, Malvern Panalytical
Albert Yang is Malvern Panalytical Taiwan Technical Manager in charge of driving the X-ray analytical products business growth. He has more than 15 years of experience in X-ray analytical instrumentation experience in structural and elemental analysis using X-ray diffraction and X-ray fluorescence. He has spent his career assisting companies from a wide span of industries from semiconductors, electronics, battery, to high end research agencies. He is well versed with the R&D and production, QC processes and challenges faced by lithium ion battery manufacturers and academia.
楊詠暉先生是Malvern Panalytical台灣區X光分析的業務副理，不論在半導體或是傳統產業都有有著超過十五年的X光分析(XRD, XRF)的經驗。他熟悉研發生產過程鋰電池製造商面臨的挑戰與需求
Kevin Fang(方駿逸), Regional Technical Manager, NDC
Kevin Fang is NDC Taiwan Sales Manager for Energy Storage System, Film Extrusion & Converting and Food & Bulk business. Prior to joining NDC, he was with Semiconductor Industries for 15 years in sales and marketing. His area of expertise is non-contact and non-destructive measurement and inspection for various assembly packages in the electric industry. . He has several years of experience working with LiB customers on various expansion plans for new electrode coating lines and roll press lines. He is familiar with these production processes and the challenges faced by LiB manufacturers.
Jacky Lin, Technical Specialist for Malvern Panalytical's particle size solutions (DKSH Taiwan)
Perguntas mais frequentes
- 從事材料表徵分析的研究人員，希望擴展在X光繞射上, XRF, layer thickness的知識