Fuel injectors are used in the automotive industry and aerospace industry to control the volume of fuel injected into an engine’s combustion chamber. The amount of fuel is controlled by the valve opening time. This is typically between 0.2 and 10ms, which can make spray droplet size measurements challenging.

The performance of a fuel injector is affected by the droplet size produced. The ideal droplet size is a balance between smaller droplets increasing the rate of vaporization, and larger droplets improving penetration into the cylinder head.

Malvern Panalytical’s systems for spray particle sizing and imaging can be used to characterize fuel injection systems. These measurement techniques can be used to:

  • Acquire high speed (10 kHz) droplet size data (with a range of measurement triggering options).
  • Measure droplet size profiles for multiple pulses in a single experiment.
    • Create average droplet size profiles.
    • Assess pulse to pulse variability.
  • Detect foreign particles to prevent nozzle wear.

Insitec dispersión para sprays

Spraytec

Insitec dispersión para sprays Spraytec

El analizador de tamaño de partículas en procesamientos es industrialmente sólido y está tecnológicamente comprobado para pulverizadores y aerosoles.

Medición del tamaño de gotas y partículas de pulverización.

Más detalles Más detalles
Tipo de medición
Tamaño de partícula
Rango de tamaño de partículas 0.1µm - 2500µm 0.1µm - 2000µm
Tecnología
Difracción láser
Dispersión de luz
Tipo de dispersión
Dry
Spray