Fecha registrada: July 29 2020

(This webinar will be conducted in Mandarin)

Titanium dioxide is a white pigment used in paints, pigments, plastics and various other specialty chemicals. It is preferred over other pigments like zinc oxide. Why? Because of its ability to give whiteness as well as hiding power or opacity to coatings. This is due to its properties of not absorbing visible light as well as its high refractive index. Titanium dioxide is however an expensive pigment and hence manufacturers need to carefully optimize it. Additionally, in terms of crystal structures TiO2 exists in two most common forms as anatase and rutile. In the pigment industry, the more stable and durable rutile is preferred since it scatters light more effectively than the counterpart anatase.

During this webinar, we share about some tips that manufacturers can engage to fully optimize their use of their pigments for high performance products. Our application specialist will draw reference to pigments such as titanium dioxide as well as other organic pigments.
1. How to check for agglomerations and ensure separation of titanium dioxide pigment particles: remember that the pigment scatters light most efficiently when all particles are separated and well dispersed
2. Monitoring the particle size of TiO2 pigments: Size affects the opacity (scattering) behaviour of the paint
3. Glossiness and durability: Maintaining a small particle size prevents against weathering. This is since coatings consisting of large particles or agglomerates can be more easily dislodged, resulting in the surface rapidly losing its gloss.
4. Anatase or Rutile:  using X-ray diffraction technique to distinguish the crystallographic structure differences as well as quantifying the amount of each specific mineral automatically.

Join our free series of applications based and data analysis related webinars:
- Webinar 1: Improving the whiteness and brightness of expensive pigments like titanium dioxide for your paints, pigments, plastics 
- Webinar 2: Introduction to crystal structure and phase analysis using X-ray diffraction. More info  
- Webinar 3: Particle size distribution data interpretation and analysis using laser diffraction. More info
- Webinar 4: Particle size distribution analysis: method development workflow. More info

=========

二氧化鈦(Titanium dioxide)俗稱鈦白粉,被廣泛用於提供白色的產品中,如油漆、顏料、塑料、牙膏和化妝品等等,由於其不吸收可見光和高折射率的特性,而有非常優秀的遮蔽能力,此特性使二氧化鈦在做為白色色粉的化學原料(氧化鋅、碳酸鉛)中更被偏好,然而,二氧化鈦是相當昂貴的,所以分析二氧化鈦的特性來優化它的表現能力對於製造商來說格外重要。另外,最通常情況下二氧化鈦以銳鈦礦(anatase)與金紅石(rutile)的晶體結構存在。但是由於有更好與耐久度,金紅石做為白色色粉受到更好的偏好。

在此網路研討會中,我們將分享一些製造商可以採取的技巧,以充分優化二氧化鈦在產品中的使用,我們的應用工程師將針對二氧化鈦與其它有機顏料的特性完成以下三大焦點討論。

1. 如何檢查結塊並確保色粉顆粒分明:當所有顆粒都分離且分散均勻時,色粉的散射光效率最佳。

2. 監測二氧化鈦的粒徑大小:粒徑會影響顏料的不透明度(散射的行為)。

3. 如何維持光澤度和耐久度:大顆粒或團塊組成的塗層較易脫落,導致表面迅速失去光澤,保持較小的粒徑可防止風化。

4. 如何確定是銳鈦礦還是金紅石: 晶體屬性決定其對應的物理效能。通過X射線衍射 (XRD)來自動化快速定相定量分析物體晶體屬性。