Introduction

This white paper outlines the main benefits of using hard radiation for material analysis studies. X-ray powder diffractometers are generally equipped with X-ray sources using Cu anodes. For specific applications, however, switching to shorter wavelength, ‘harder’ radiation, like obtained from X-ray tubes with Mo or Ag anodes, gives significant improvements over Cu, or even allows experiments that are impossible with Cu radiation, like experiments where a large Q range needs to be probed. 

Often, people make use of synchrotron radiation, but new developments on source, optics and detector technologies allow a variety of hard radiation experiments in the home lab. In this white paper we present six key advantages of hard radiation studies.

Larger penetration depth 

For inorganic materials, the penetration depth of Cu K-alpha is often only a few micrometers (see Table 1). In order to extract information from a larger sample volume, hard radiation is an advantage in transmission experiments. Thanks to the larger penetration depth, it is possible to observe crystallographic changes in working devices, such as Li-ion batteries, and perform highpressure experiments with diamond anvil cells. Hard radiation allows using transmission geometry for inorganic samples.


WP20170726 Table 1. Example of penetration depth in µm for different materials.jpg

Table 1. Example of penetration depth in µm for different materials and different X-ray wavelengths 


Login or create an account to read more about this case study.

ログイン

初めての方

会員登録いただくと、以下のような会員様限定コンテンツを無料でご覧いただけます。

  • 録画版ウェブセミナー、プレゼン資料、動画
  • アプリケーションノート、技術資料、記事、ホワイトペーパー、ソフトウェアダウンロード

加えて、以下の情報が定期的に届くメールニュースにも任意でご登録いただけます。

  • 最新のマルバーン・パナリティカル製品情報、技術情報、分析について学べるセミナー・ウェブセミナー・イベント情報