NanoSight NS500 Zeta Potential Analysis

NanoSight NS500 Zeta Potential Analysis Flow Chart for Use with NTA Software Versions 3.1 and 3.2

Introduction

The NanoSight NS500 instrument is able to generate high resolution particle-by-particle zeta potential measurements when fitted with the zeta potential option. Zeta potential measurements are derived at the same time as particle size data enabling users to have a direct verification of the impact of a particles' size to its zeta potential as well as the overall colloid stability of the sample.

The flow charts in this document provide a walk through of how to start  and prime the fluidic systems of the NS500, find the correct measurement location, load a sample, generate and run a zeta potential script, flush and shut down the system.

Flowchart: Instructions for how to switch on the NanoSight NS500

 

Flowchart: Instructions for how to prime the fluidic system on the NanoSight NS500


Flowchart: Instructions for how load a sample using the on-board fluids on the NanoSight NS500


Flowchart: Instructions for how to set the measurement capture location and settings on the NanoSight NS500


Flowchart: Instructions for how to correctly set up the NanoSight NS500 prior to making a particle by particle zeta potential measurement  


Flowchart: Instructions for how to set up a particle by particle zeta potential measurement script on the NanoSight NS500


Flowchart: Instructions for how to run a particle by particle zeta potential measurement script on the NanoSight NS500 including setting process settings and exporting data


Flowchart: Instructions for how to remove a sample from the NanoSight NS500 ready to measure further samples or to shut down the instrument


Flowchart: Instructions for how to shut down the NanoSight NS500

ログイン

まだ登録されていませんか? アカウントを作成する