The Mastersizer 2000 software can save to a network and to do this you will need to create a network path that the PC will always connect to. The total path length must not exceed 255 characters.
To configure the Mastersizer 2000 software, you will need to edit the ‘Mastersizer 2000.ini’ configuration file found in the following location…
C:\Documents and Settings\All Users\Application Data\Malvern Instruments\Mastersizer 2000
…and replace the first line under the title [Program Directories] to be the same as your network path.
By default, data is saved to:
C:\Documents and Settings\All Users\Documents\Malvern Instruments\Mastersizer 2000\Measurement Data