See the current Morphologi range . Learn more

Learn more

モフォロギ 4-ID

Morphologi 4-IDでは、形態学的ラマン分光法(MDRS)により、粒子混合物の詳細な成分固有の形態学的説明が得られます。これにより、単一の統合されたプラットフォームで自動粒子画像解析とラマン分光法を組み合わせて、複雑な粒子特性評価の問題を解決することができます。Morphologi 4-IDソフトウェアは、WileyのKnowItAll® Raman Identification Proソフトウェアプラットフォームとシームレスに連携し、ラマンスペクトルを迅速に同定します。

さらに詳しい情報をお探しですか?

見積もり、詳細情報をリクエストするか、パンフレットをダウンロードするには、以下のオプションを選択してください。

ユーザーマニュアル

ソフトウェアのダウンロード

28 April 2025

11.00

  • Software Re-branding to Malvern Panalytical
  • Windows 11 Support
  • Core Isolation Compatibility
  • Fixed 3 critical bugs on manual focusing, 1-click ID measurement, and plate tilt resurfacing
  • Improvements on focus coincidence test script
  • Fixed some ui bugs
  • Updated the environmental libraries and 3rd party tools
11.00

08 November 2023

10.34

Reverting to a previous driver version and improving the robustness of the image capture code and ability to restart an unresponsive camera to maintain ESD compliance.

10.34

11 August 2021

10.32

Version 10.32 fixes 2 critical bugs, the audit trail files are now protected from accidental modification and manual light

setting measurements which were prevented by v10.31 can be run again.

10.32

02 December 2020

10.31

This release improves the Installation Qualification (IQ) process with new Performance Verification (PV) and system

check reports for Morphological and ID components. Stability and security have also been

improved with new camera drivers and restrictions on custom calculation functionality.

10.31

23 June 2020

10.30

Improved spectral performance

  • Addition of option to collect a background spectrum at start of measurement. This feature improves the user’s workflow as it ensures a background spectrum is collected from the actual sample being analyzed at the start of the measurement process, preventing the possibility of an incorrect background being used.
  • Improvements to the Raman Spectra signal to noise when acquisition time is 2 minutes or longer.
10.30

12 February 2020

10.21

  • Enable full software functionality with non-English PC language settings (tested on English & French and verified on German and Japanese locales).
10.21

18 March 2019

10.20

  • 21 CFR Part 11 support
10.20

06 July 2018

10.10

  • Morphologi 4-ID instrument support
10.10

アクセサリ

試料内の個々の粒子が適切に分散、凝集すると、信頼性が高く安定した結果を得ることができます。適切な分散と代表的な試料の粒子が必要です。これを達成するために、モフォロギ 4-ID には多数の分散オプションが用意されています。

簡単で再現性のある自動試料分散
Morphologi 4-IDには乾式ユニットが搭載されています。簡単に、再現性のある方法で、乾燥粉体試料を調製できます。ソフトウェアから制御できる独自の圧縮空気分散メカニズムを使用して、正確な量の試料が自動的に分散されるため、毎回再現性の高い分散を実現します。 

オプションのアクセサリ – 懸濁液中の粒子の分析用
さまざまな装置アクセサリにより、顕微鏡スライド上、湿式懸濁液中、またはフィルター上の試料を調製できるようになるので、Morphologi 4-IDの機能は乾式試料分散の特性評価の範囲を超えて拡張されます。各アクセサリは自動試料台エリアに直接取り付けることができ、モフォロギソフトウェアから簡単に選択できます。

識別ソフトウェア

KnowItAll® ID Expert software platform from Wiley

Wiley’s KnowItAll® ID Expert software platform works seamlessly with Malvern Panalytical’s Morphologi software to provide rapid identification of your Raman spectra.

懸濁液中の粒子を分析する際に使用するアクセサリ

2-slide and 4-slide holders

‘Sandwiching’ a few μL of a suspension of smaller particles between a microscope slide and a cover slip is a traditional method of sample preparation for microscopy. Samples are presented in this form to the Morphologi G3-ID using either the 2-slide or 4-slide holder. Slides suitable for chemical identification applications are available.

Thin-path wet cell

The thin-path wet cell is designed for both morphological and chemical characterization of up to 100 μL of sample. It is ideal for applications such as the identification of subvisible particles in therapeutics (described by guidance in USP <787> and USP <788>), especially when a traditional membrane filtering approach may risk changing particles of interest, such as protein aggregates.

膜フィルターに捕集された粒子を分析する際に使用するアクセサリ

25 mm and 47 mm diameter filter holders

Methods which are used to detect and characterize particles in suspension often rely on filtering the sample in order to capture particles on a membrane filter. Dedicated filter holders (25 mm or 47 mm diameter) and also the 2-slide holder (see above) allow samples on filter membranes to be presented directly to the Morphologi G3-ID for analysis.
Fused silica filters and holder

Fused silica filters and holder

Fused silica filters are designed to enable the analysis of filtered samples containing low-contrast particles, such as protein aggregates or contaminant particles.  The fused silica filters are housed in a support for ease of handling, and are presented to the Morphologi in the fused silica holder, which can hold up to 2 filters.

サービスとサポート

Malvern Panalyticalのサービスプランは、常にお客様の資産を守り、最適なパフォーマンスを保証します。

お客様がMalvern Panalytical製品をお買い求めになってから、製品が寿命を迎えるまで、Malvern Panalyticalはお客様を継続的にサポート致します。 お客様のニーズに応じて、Malvern Panalyticalが最適なサポートをご提供致します。

ヘルプデスク

トレーニング

  • ユーザトレーニングイベント

ソフトウェア ダウンロード

Malvern Panalyticalのサービスオプション:お客様に最適なプランをお選びください。

Malvern Panalyticalプラチナプラン

装置の使用可能時間を最大限に高めることが日々の装置パフォーマンスには重要と考えておられるラボに。 当社のハイレベルな対応と「包括的」費用プランが、不測の事態が生じた場合の予期せぬ修理費用をカバーします。

Malvern Panalyticalゴールドプラン

装置効率を維持することで、お客様のラボの生産性を高めます。 上記の優先対応を受けていただきながら、専門家による技術サポート・ソフトウェアサポートも併せ、お使いの装置が性能を発揮できるようサポート致します。

Malvern Panalyticalブロンズ訪問点検

装置性能の最適化に注目しているラボには、予防保守がきわめて重要となります。

プラチナプランゴールドプランブロンズ訪問点検
年間PM/PVテスト
あり
あり
いいえ
電話/Eメールサポート
あり
あり
いいえ
優先対応
あり
あり
いいえ
急な故障時の訪問点検*
あり
あり
いいえ
部品込み
あり
いいえ
いいえ
技術サポートおよびソフトウェアサポート
あり
あり
あり
据え付け時適格性確認(IQ)/稼働性能適格性確認(OQ)(医薬)***
あり
あり
あり

*作業費用および出張費用を含む***追加料金にて提供可

サポート依頼